Warm brick color without trapped moisture
Brick Paver Sealing in Anastasia Island, FL
Call (904) 274-8546 for a free brick paver sealing estimate on Anastasia Island.
- Brings out deeper paver color
- Fresh joint sand helps lock pavers in place
- Gives weeds less room to grow
- Makes the surface easier to keep clean
- Free estimate, no obligation
Request a Free Estimate
Free, no obligation.
Who seals brick pavers on Anastasia Island, and how soon will someone answer?
A local contractor handles brick paver sealing in every part of Anastasia Island, FL, and you can expect an answer within 1 business day, usually sooner. The estimate is free and carries no pressure. To start, call (904) 274-8546.
Brick is different from concrete, so the work is too. Clay brick breathes, and a thick film on top can hold moisture in and turn cloudy or flake. A breathable coat lets the brick keep its warm color and let vapor out. Tell the contractor what is on your walk or patio and how old the old coat is when you ask for a free estimate.
What is different about sealing brick pavers?
Brick takes in water, which is the reason it needs a sealer that lets water vapor leave. Prosoco, a masonry products maker, says penetrating sealers soak in and keep the surface breathable, while film coatings sit on top and may trap vapor. A St. Augustine paver company applies a breathable penetrating sealer such as silane or siloxane to clay brick. Ask what goes on yours when you ask for a free estimate.
The same company uses a film acrylic on concrete pavers, so a yard with both materials may need two products. A second company says it seals concrete, clay and natural stone pavers. That is worth a direct question: does the contractor handle brick, and which product? Call (904) 274-8546 to ask.
Shell rock has a long history on the island. Wikipedia says coquina, a rock made of tiny clam shells, lies under the sand here and was quarried for St. Augustine's old buildings. Natural stone has its own sealer needs, and one local company uses a separate product for it. Mention any stone edging or steps when you ask for a free estimate.
Penetrating or film-forming: which goes on island brick?
A penetrating sealer reacts inside the pores and leaves the surface open. Ask the Builder says silane and siloxane repel liquid rain while water vapor, a much smaller molecule, still gets out, and it points to breathable clear sealant for soft brick. Prosoco says film coatings can add gloss or color but may peel when vapor is trapped. Call (904) 274-8546 and ask which family your brick gets.
A film does one thing a penetrating coat does not. Prosoco's own notes say a film can add a wet look or a matte finish, and a local company says wet look is offered only where the material and its condition allow it. If shine matters to you, say so when you ask for a free estimate. If long life matters more, ask about a breathable coat first.
Can I pressure wash brick pavers?
Yes, with a light hand. Western Interlock, a paver maker, says to keep pressure at about 1,500 PSI or less, with the nozzle at least 6 inches from the surface, and it warns that pressure can wash sand out of the joints. Brick that has been sealed can lose its coat to too much pressure. Ask what pressure and tip are planned when you ask for a free estimate.
A hotter, harder blast is not the answer to green growth. Cleaners and time do more than force, and a careful contractor lets them work. Another St. Augustine company says it calibrates pressure for each surface to avoid etching. To hear how yours would be washed, call (904) 274-8546.
Will sealer change the color of my brick?
It can. Prosoco says many penetrating sealers leave little visible change, but darkening or sheen can still occur, and it advises testing a small area first. Unilock gives the same advice for pavers. A hidden corner or an edge near the beds is a good place. To set up a test patch, ask for a free estimate.
Overspray is the other risk. Ask the Builder says sealer that lands on the wrong surface can leave a white stain that has no known fix. Plants, windows and the stucco wall behind a walk should be covered first. Ask how that is handled when you call (904) 274-8546.
What if the old sealer on my brick is peeling or white?
A coat that has failed has to come off before a new one goes on. Prosoco says failing film should be fully removed first. A St. Augustine company says a whitening or peeling film needs stripping, not just a recoat, and lists stripping, cleaning, sanding and sealing at $2.75 to $3.50 per square foot. Show the contractor the white spots when you ask for a free estimate.
Another local company says a thick film on clay brick traps moisture and causes flaking or haze. If that is what you have, a second coat on top makes it worse. Call (904) 274-8546 and describe the haze before anyone quotes a recoat.
How much does brick paver sealing cost on Anastasia Island?
No page opened for this guide gives a rate for brick alone, so the table below is built from published pieces: cleaning, re-sanding and stripping a failed film and resealing. The local range for cleaning and sealing is $1.50 to $3.25 per square foot, and jobs run $500 to $3,000. For a number on your brick, ask for a free estimate.
A breathable penetrating sealer is priced by the contractor, since no page gave that rate either. Ask for it in writing and compare it with the film price. Call (904) 274-8546 to get quotes side by side.
| Brick area | Wash only | Clean and re-sand | Strip old film and reseal |
|---|---|---|---|
| 400 sq ft | $120 to $200 | $300 to $400 | $1,100 to $1,400 |
| 800 sq ft | $240 to $400 | $600 to $800 | $2,200 to $2,800 |
| 1,200 sq ft | $360 to $600 | $900 to $1,200 | $3,300 to $4,200 |
The per square foot pieces come from one St. Augustine paver company's published list, read in November 2026: cleaning only $0.30 to $0.50, cleaning and re-sanding $0.75 to $1.00, cleaning, sanding and sealing $1.75 to $2.50, and stripping failed sealer first $2.75 to $3.50. A real quote can land above or below these numbers.
How long does brick paver sealer last on the island?
Prosoco says most treatments last about 3 to 7 years, depending on chemistry, traffic and sun, and that sprinklers and runoff can shorten it. A St. Augustine company says to reseal every 2 to 3 years near the Matanzas River or the bayfront, and a third says every 2 to 3 years with a yearly check. To plan yours, call (904) 274-8546.
Between coats, wash it. One company suggests at least once a year, and every six months in humid yards or near many trees. St. Augustine gets about 50 inches of rain a year over roughly 118 rainy days, so brick in shade stays damp. Ask about a wash plan when you ask for a free estimate.
How does the brick paver sealing process work, step by step?
The brick paver sealing process starts with the material and a test patch, not the sealer. Five steps follow, and drying is the longest. To get on the calendar, call (904) 274-8546.
1. Name the material
The contractor identifies clay brick, concrete or stone, since the sealer choice follows the material.
2. Test a small area
Prosoco and Unilock both say to try the sealer on a small hidden spot first to check color and sheen.
3. Clean at low pressure
About 1,500 PSI at most with the nozzle at least 6 inches off the brick, the limits Western Interlock gives.
4. Fill the seams and dry
Fresh sand goes in once the brick is dry, and the surface needs time before any sealer is applied.
5. Seal in one session
A breathable sealer goes on with care so overspray stays off plants and walls, and the whole area is done at once.
Which towns near Anastasia Island get brick paver sealing too?
A contractor who works the island also covers St. Augustine across the Bridge of Lions and towns well up and down the coast. Every town page is linked below. If your street is missing, call (904) 274-8546.
What do sealed brick pavers look like on Anastasia Island?
What do Anastasia Island homeowners ask about brick paver sealing?
How long do paver sealers last?
Prosoco, a masonry products maker, says most treatments last about 3 to 7 years, depending on the chemistry, traffic and sun. Unilock gives three to five for pavers, and local companies say two to three years near salt air. Sprinklers and runoff can shorten it.
Can I pressure wash brick pavers?
Yes, with care. Western Interlock, a paver maker, says to keep pressure at about 1,500 PSI or less with the nozzle at least 6 inches away, because pressure can wash the sand out of the joints. Ask the contractor what pressure and tip are planned.
Why is paver sealing so expensive?
Prep is most of the price. Cleaning, joint sand and drying take longer than the coat does, and stripping a failed film adds about a dollar per square foot, based on one local company's list of $2.75 to $3.50.
Which paver sealer is right for Florida?
For clay brick, a St. Augustine paver company uses a breathable penetrating sealer such as silane or siloxane instead of a thick film. For concrete pavers it uses a film acrylic. The right one depends on what is under your feet.
What is the difference between a penetrating and a film-forming sealer?
Prosoco says a penetrating sealer soaks in and keeps the surface breathable, while a film sits on top, can add gloss and may trap vapor. A film that traps moisture can peel over time.
Will sealer change the color of my brick pavers?
It can. Prosoco says many penetrating sealers leave little visible change, but darkening or sheen can still happen, so it advises testing a small area. A film coat can add gloss or a wet look.
Can a sealer leave white spots on brick?
Overspray can. Ask the Builder says a penetrating sealer sprayed carelessly can leave white stains that have no known fix. Plants and nearby surfaces should be covered before the sealer goes on.
How do I know if old sealer on my brick has failed?
A St. Augustine company says a film that whitens or peels needs stripping, not a recoat. Another says haze and flaking come from trapped moisture under a thick film on clay brick. A contractor can tell on the visit.
How often should brick pavers on Anastasia Island be washed?
A St. Augustine company suggests washing at least once a year, and every six months in humid yards or near many trees. A second recommends professional cleaning every 12 to 18 months.
What does brick paver sealing cost on Anastasia Island?
No page gave a brick-only rate. Built from local pieces, an 800 square foot brick patio costs about $600 to $800 to clean and re-sand, or $2,200 to $2,800 to strip old film and reseal.
What other paver services can a local contractor handle?
A brick walk often sits beside a driveway or patio of another material. Each page below covers one surface. To go over all of them at once, call (904) 274-8546.
Ask about sealing your brick pavers on Anastasia Island
Call or send the short form. A contractor answers within 1 business day, usually sooner.
Free, no obligation